Chapter 8: Using the Command Line Interface365ExamplesThis section illustrates several network configuration examples.Example 1 - Networking ModeThe following command enables the wired networking mode.config:# network mode wiredExample 2 - Enabling Both IP ProtocolsThe following command determines that both IPv4 and IPv6 protocolsare enabled.config:# network ip proto bothExample 3 - Wireless Authentication MethodThe following command sets the wireless authentication method to PSK.config:# network wireless authMethod PSKExample 4 - Static IPv4 ConfigurationThe following command enables the Static IP configuration mode.config:# network ipv4 ipConfigurationMode staticTime Configuration CommandsA time configuration command begins with time.Determining the Time Setup MethodThis command determines the method to configure the system date andtime.config:# time method Variables: is one of the time setup options: manual or ntp.Mode Descriptionmanual The date and time settings are customized.
