1025// The hold timer expired on BGP peer 2.2.2.2.debugging bgp updateSyntax debugging bgp update [ acl acl-number | ip-prefix ip-prefix-name] [ receive | send ] [verbose ]undo debugging bgp update [ acl acl-number | ip-prefix ip-prefix-name] [ receive |send ] [ verbose ]View User viewDefault Level 1: Monitor levelParameters acl acl-number: Specifies an access control list (ACL) for filtering packetdebugging information. The acl-number argument ranges from 2000 to 3999.ip-prefix ip-prefix-name: Specifies an IP prefix list for filtering the packetdebugging information. ip-prefix-name is a string of 1 to 19 characters.receive: Enables the debugging for received BGP packets.send: Enables the debugging for sent BGP packets.verbose: Displays detailed debugging information.Description Use the debugging bgp update command to enable debugging for BGPUpdate messages.Use the undo debugging bgp update command to disable debugging for BGPUpdate messages.By default, this debugging is disabled.Enabling debugging may affect system performance; therefore, use this commandonly when necessary and disable debugging once the debugging operation iscomplete.Table 230 Description on the fields of the debugging bgp update commandField DescriptionBGP.xxx BGP instance nameErr/SubErErrdata:Error code/error subcodeError datax.x.x.x/xx Destination address/maskRPM policy failed for policy :name:xx :Failed to pass policy xxINBOUND Inbound policytnl id Tunnel ID
