1941local-user password-display-modeSyntax local-user password-display-mode { auto | cipher-force }undo local-user password-display-modeView System viewParameter auto: Displays the password of an accessing user based on the configuration ofthe user by using the password command.cipher-force: Displays the passwords of all accessing users in cipher text.Description Use the local-user password-display-mode command to set the passworddisplay mode for all local users.Use the undo local-user password-display-mode command to restore thedefault.The default mode is auto.With the cipher-force mode configured,■ A local user password is always displayed in cipher text, regardless of theconfiguration of the password command.■ If you use the save command to save the configuration, all existing local userpasswords will still be displayed in cipher text after the device restarts, even ifyou restore the display mode to auto.Related command: display local-user, password.Example # Specify to display the passwords of all accessing users in cipher text.[Sysname] local-user password-display-mode cipher-forcepasswordSyntax password { cipher | simple } passwordundo passwordView Local user viewParameter cipher: Specifies to display the password in cipher text.simple: Specifies to display the password in simple text.password: Password for the local user.
