1044 CHAPTER 74: IS-IS CONFIGURATION COMMANDSRestart Interval: 150SA Bit SupportedTotal Number of Interfaces = 1Restart Status: RESTARTINGNumber of LSPs Awaited: 3T3 Timer Status:Remaining Time: 239T2 Timer Status:Remaining Time: 59IS-IS(1) Level-2 Restart StatusRestart Interval: 150SA Bit SupportedTotal Number of Interfaces = 1Restart Status: RESTARTINGNumber of LSPs Awaited: 3T3 Timer Status:Remaining Time: 239T2 Timer Status:Remaining Time: 59display isis interfaceSyntax display isis interface [ [ traffic-eng | verbose ] * | tunnel ] [ process-id | vpn-instancevpn-instance-name ]View Any viewParameters traffic-eng: Displays IS-IS traffic engineering information.verbose: Displays IS-IS interface detail information.tunnel: Displays IS-IS tunnel information.process-id: IS-IS process ID, in the range of 1 to 65535.vpn-instance-name: VPN instance name, a string of 1 to 31 characters.Description Use the display isis interface command to view IS-IS enabled interfaceinformation.The information displayed by this command includes interface name, interface IPaddress, interface link state and so on. Besides all the information displayed byTable 234 Description on the fields of the display isis graceful-restart status commandField DescriptionRestart Interval Graceful Restart intervalSA Bit Supported The SA bit is setTotal Number of Interfaces = 1 The current IS-IS interface numberRestart Status: Graceful Restart statusT3 Timer Status Remaining time of T3 timerT2 Timer Status: Remaining time of T2 Timer
