865display natpt allSyntax display natpt allView Any viewParameter NoneDescription Use the display natpt all command to display all NAT-PT configurationinformation.Example # Display all NAT-PT configuration information. display natpt allNATPT IPv4 Address Pool Information:1: from 1.1.1.1 to 1.1.1.4NATPT address mapping(v6bound view):IPv4 Address IPv6 Address Type1.1.1.1 3001::0001 SOURCE2.2.2.2 3001::0002 DESTINATIONNATPT V6Server static mapping:IPv4Address IPv6 Address Pro1.1.1.1^ 6 3001::0003^ 1270 TCPNATPT V4bound information:No Dynamic V4 Address Records PresentNATPT V6bound information:No Dynamic V6 Address Records PresentNATPT Prefix Info:Prefix Interface NextHop2001::NATPT aging-time value information:tcp -------aging-time value is 86400 (seconds)udp -------aging-time value is 40 (seconds)icmp -------aging-time value is 20 (seconds)dns -------aging-time value is 10 (seconds)syn -------aging-time value is 240 (seconds)icmp -------aging-time value is 20 The timeout time for an ICMP packet is 20 seconds.dns -------aging-time value is 10 The timeout time for a DNS packet is 10 seconds.syn -------aging-time value is 240 The timeout time for a synchronization packet is 240seconds.finrst -------aging-time value is 5 The timeout time for a finrst packet is 5 seconds.frag -------aging-time value is 5 The timeout time for a fragmented packet is 5seconds.Table 185 Description on fields of the display natpt aging-time commandField Description
