1290 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDSDescription Use the display ospfv3 request-list command to display OSPFv3 link staterequest list.If no process is specified, link state request list information of all OSPFv3 processesis displayed.Examples # Display the information of OSPFv3 link state request list. display ospfv3 request-listOSPFv3 Router with ID (1.1.1.1) (Process 1)Interface Eth1/0 Area-ID 0.0.0.1----------------------------------------------------------------------Nbr-ID 2.2.2.2LS-Type LS-ID AdvRouter SeqNum AgeAS-External-LSA 0.0.16.66 2.2.2.2 0x80000001 98AS-External-LSA 0.0.16.67 2.2.2.2 0x80000001 98AS-External-LSA 0.0.16.68 2.2.2.2 0x80000001 98# Display the statistics of OSPFv3 link state request list. display ospfv3 request-list statisticsOSPFv3 Router with ID (1.1.1.1) (Process 1)Interface Neighbor LSA-CountEth1/0 2.2.2.2 0display ospfv3 retrans-listSyntax display ospfv3 [ process-id ] retrans-list [ statistics ]View Any viewParameters process-id: OSPFv3 process ID, in the range 1 to 65535.Table 307 Description on the fields of the display ospfv3 request-list commandField DescriptionInterface Interface nameArea-ID Area IDNbr-ID Neighbor router IDLS-Type Type of LSALS-ID Link state IDAdvRouter Advertising routerSeqNum LSA sequence numberAge Age of LSATable 308 Description on the fields of the display ospfv3 request-list statistics commandField DescriptionInterface Interface nameNeighbor Neighbor router IDLSA-Count Number of LSAs in the request list
