2364 CHAPTER 156: CONFIGURATION F ILE MANAGEMENT COMMANDShas both the main and backup attributes, the command erases its backupattribute.c CAUTION: This command will permanently delete the configuration file on thedevice. Use it with caution.Related command: save, display saved-configuration.Example # Erase the configuration file saved in the storage device. (main/backup attributenot supported) reset saved-configurationThe saved configuration will be erased.Are you sure? [Y/N]:yConfiguration in the device is being cleared.Please wait .......Configuration in the device is cleared.# Erase the configuration file saved in the storage device. (main/backup attributesupported) reset saved-configuration backupThe saved configuration will be erased.Are you sure? [Y/N]:yConfiguration in the device is being cleared.Please wait .......Configuration in the device is cleared.restore startup-configurationSyntax restore startup-configuration from src-addr src-filenameView User viewParameter src-addr: IP address or name of a TFTP server. The address cannot be an IPv6address.src-filename: Filename of the configuration file to be downloaded from thespecified server.Description Use the restore startup-configuration command to download theconfiguration file from the specified TFTP server for the next startup of the device.■ This command will download the configuration without copying it to thebackup board.■ If a device supports main/backup configuration file, the file downloaded is themain configuration file.■ If a device does not support main/backup configuration file, the commanddownloads the configuration file for next startup.If the file to be downloaded has the same filename as an existing file on the mainor backup board, you will be prompted whether you want to overwrite the
