1528 CHAPTER 95: MPLS B ASICS CONFIGURATION COMMANDSParameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31characters.|: Filters the output information.begin: Begins with the specified string.include: Includes the specified string.exclude: Excludes the specified string.regular-expression: Regular expression, a string of 1 to 80 characters. No blankspace is acceptable.Description Use the display mpls ldp vpn-instance command to display information abouta specified VPN instance.Related command: mpls ldp (system view), mpls ldp (interface view).Example # Display information about VPN instance vpn1. display mpls ldp vpn-instance vpn1LDP Global Information--------------------------------------------------------------------Protocol Version : V1 Neighbor Liveness : 60 SecGraceful Restart : Off FT Reconnect Timer : 60 SecMTU Signaling : On Recovery Timer : 60 SecLDP Instance Information--------------------------------------------------------------------Instance ID : 1 VPN-Instance : vpn1Instance Status : Active LSR ID : 1.1.1.9Hop Count Limit : 32 Path Vector Limit : 32Loop Detection : OffDU Re-advertise Timer : 30 Sec DU Re-advertise Flag : OnDU Explicit Request : Off Request Retry Flag : OnLabel Distribution Mode : Ordered Label Retention Mode : Liberaln For description on the fields of the command output, see Table 370.display mpls lspSyntax display mpls lsp [ { incoming-interface | outgoing-interface } interface-typeinterface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ { exclude |include } dest-addr mask-length ] [ vpn-instance vpn-instance-name ] [ asbr |protocol { bgp | bgp-ipv6 | crldp | ldp | rsvp-te | static | static-cr } ] [ egress | ingress| transit ] [ verbose ]View Any viewParameter incoming-interface: Incoming interface of the LSPs.outgoing-interface: Outgoing interface of the LSPs.
