966 CHAPTER 72: BGP CONFIGURATION COMMANDSdisplay bgp pathsSyntax display bgp paths [as-regular-expression]View Any viewParameters as-regular-expression: AS path regular expression.Description Use the display bgp paths command to display information about BGP paths.Examples # Display information about BGP paths matching the AS path regular expression. display bgp paths ^200Address Hash Refcount MED Path/Origin0x5917100 11 1 200 300idisplay bgp peerSyntax display bgp peer [ ip-address { log-info | verbose } | group-name log-info | verbose ]View Any viewParameters ip-address: IP address of an peer to be displayed, in dotted decimal notation.Mask MaskRoute-policy Routing policyShort-cut Short-cut routeTable 216 Description on the fields of the display bgp network commandField DescriptionTable 217 Description on the fields of the display bgp paths commandField DescriptionAddress Route address in local database, in dotted hexadecimal notationHash Hash indexRefcount Count of routes that referenced the pathMED MED of the pathPath AS_PATH attribute of the path, recording the ASs it has passed, for avoidingrouting loopsOrigin Origin attribute of the route:i Indicates the route is interior to the AS.Summary routes and routes defined using the network commandare considered IGP routes.e Indicates that a route is learned from the exterior gatewayprotocol (EGP).? Short for INCOMPLETE. It indicates that the origin of a route isunknown and the route is learned by other means.
