1678 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS display bgp vpnv4 all pathsAddress Hash Refcount MED Path/Origin0x6E72D80 4 1 0 200?0x6E72CB0 15 2 0 ?display bgp vpnv4 peerSyntax display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer [ group-namelog-info | ip-address { log-info | verbose } | verbose ]View Any viewParameter all: Specifies all VPNv4 peers.vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.group-name: Name of the peer group, a string of 1 to 47 characters.log-info: Displays log information.ip-address: IP address of the peer.verbose: Displays detailed information.Description Use the display bgp vpnv4 peer command to display information about BGPVPNv4 peers.Example # Display information about BGP VPNv4 peers of VPN instance vpn1. display bgp vpnv4 vpn-instance vpn1 peerBGP local router ID : 2.2.2.2Local AS number : 100Total number of peers : 1 Peers in established state : 1Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State10.1.1.1 4 200 24 29 0 1 00:18:47 EstablishedTable 446 Description on the fields of the display bgp vpnv4 paths commandField DescriptionAddress Routing address in the local databaseHash Hash bucket for storing routesRefcount Number of times that the path is referencedMED Metric for routesPath/Origin AS_PATH and origin attributes of the route, see Table 443.Table 447 Description on the fields of display bgp vpnv4 vpn-instance peerField DescriptionBGP Local router ID Router ID of the local BGP routerlocal AS number Local AS numberTotal number of peers Total number of peersPeers in established state Number of peers in the state of established
