2295enableSyntax enableundo enableView NetStream aggregation viewParameter NoneDescription Use the enable command to enable current aggregation mode.Use the undo enable command to disable current aggregation mode.By default, no aggregation mode is enabled.Related command: ip netstream aggregation.Example # Enable NetStream AS aggregation. system-view[Sysname] ip netstream aggregation as[Sysname-aggregation-as] enableip netstreamSyntax ip netstream { inbound | outbound }undo ip netstream { inbound | outbound }View Interface viewTable 604 Description on the fields of the display ip netstream export commandField DescriptionVersion 5 export information Statistics for exported version 5 statisticspacketsStream source interface Source interface of exported UDP packetsStream destination IP(UDP) Destination address and port number ofexported UDP packetsExported stream number Number of exported streamsExported UDP datagram number(failed number) Number of exported UDP packets (numberof failed sending attempts)Version 8 AS aggregation export information Statistics for exported version 8 ASaggregation UDP packets. Displayed onlywhen NetStream aggregation is enabled.Version 8 tos-source-prefix export information Statistics for exported version 8 ToS-sourceprefix aggregation packets
