1840 CHAPTER 118: P RIORITY MAPPING TABLE CONFIGURATION COMMANDSqos map-table dot1p-IpSyntax qos map-table dot1p-lpView System viewParameters dot1p-lp: Mapping table of 802.1p priority to local priority.Description Use the qos map-table command to enter the specified priority mapping tableview.Related commands: display qos map-table.Examples # Enter the mapping table view from 802.1p priority to local priority. system-view[Sysname]qos map-table dot1p-lp[Sysname-maptbl-dot1p-lp]importSyntax import import-value-list export export-valueundo import { import-value-list | all }View Priority mapping table viewParameters import-value-list: Maps input parameter list.export-value: Maps export parameters.all: Deletes all parameters in this mapping table.Description Use the import command to configure the parameters in the specified prioritymapping table to define a mapping rule or a group of mapping rules.Use the undo import command to delete the mapping entries corresponding tospecified mapping index. The deleted entries are restored to default value.The default value is shown in the following table:Table 488 Parameters in the default mapping table802.1p priority Local priority0 21 02 13 3
