2431Description Use the display logfile buffer command to display contents of the log filebuffer.n The support for the command varies with devices.Example # Display the contents of the log file buffer. display logfile buffer%@387986%Jun 20 10:52:03 2006 Sysname %%10IC/7/SYS_RESTART:System restarted --H3C Platform Software%@387988#Jun 20 10:52:48:494 2006 Sysname ENTITY/5/CPU THRESHOLD REACHED:Trap 1.3.6.1.4.1.2011.10.2.6.2.0.4: Entity ID is 3, cpu usage is 100%, cpuusage threshold is 100%, admin status is 1, alarm light status is 0%@387989#Jun 20 10:52:48:495 2006 Sysname DEV/2/BOARD TEMPERATURE NORMAL:Trap 1.3.6.1.4.1.2011.2.23.1.12.1.15: frameIndex is 0, slotIndex 0.0%@387990%Jun 20 10:52:48:495 2006 Sysname DEV/5/BOARD TEMP NORMAL:The rest is omitted here.display logfile summarySyntax display logfile summaryView Any viewParameter NoneDescription Use the display logfile summary command to display the configuration of thelog file.Example # Display the configuration of the log file.[Sysname]display logfile summaryLog file is enabled.Channel number : 9Log file size quota : 0 MB (0 for unlimited)Log file directory : cf:/logfileWriting frequency : 0 hour 0 min 10 secTable 631 Descriptions on the fields of the display logfile summary commandField DescriptionLog file is The current state of a log file, which could be enabled or disabled.Channel number The channel number of a log file, defaults to 9.Log file size quota The maximum storage space reserved for a log fileLog file directory Log file directoryWriting frequency Log file writing frequency
