2504 CHAPTER 166: P OE CONFIGURATION COMMANDSpoe pse-policy prioritySyntax poe pse-policy priorityundo poe pse-policy priorityView System viewParameter NoneDescription Use the poe pse-policy priority command to configure a PSE powermanagement priority policy.Use the undo poe pse-policy priority command to remove the PSE powermanagement priority policy.By default, no PSE power management priority policy is configured.Example # Configure a PSE power management priority policy. system-view[Sysname] poe pse-policy prioritypoe updateSyntax poe update { full | refresh } filename [ pse pse-id ]View System viewParameter full: Specifies to upgrade the PSE processing software in full mode when thesoftware is unavailable.refresh: Specifies to upgrade the PSE processing software in refresh mode whenthe software is available.filename: Name of the upgrade file, a string of 1 to 64 characters. This file must beunder the root directory of the file system of the device. The extension of theupgrade file varies with devices.pse pse-id: Specifies a PSE ID. The support for this argument varies with devices.pse-id indicates number of the slot where a PoE interface locates.Description Use the poe update command to upgrade the PSE processing software online.Example # Upgrade the processing software of PSE 2 online system-view[Sysname] poe update refresh 0400_001.S19 pse 2
