1367Description Use the display msdp peer-status command to view the detailed MSDP peerstatus information.Related command: peer connect-interface, peer description, peer mesh-group, peerminimum-ttl, peer request-sa-enable, peer sa-cache-maximum, peersa-policy, and peer sa-request-policy.Example # View the detailed status information of the MSDP peer with the address of10.110.11.11 in the public instance. display msdp peer-status 10.110.11.11MSDP Peer Information of VPN-Instance: public netMSDP Peer 20.20.20.20, AS 100Description:Information about connection status:State: UpUp/down time: 14:41:08Resets: 0Connection interface: LoopBack0 (20.20.20.30)Number of sent/received messages: 867/947Number of discarded output messages: 0Elapsed time since last connection or counters clear: 14:42:40Information about (Source, Group)-based SA filtering policy:Import policy: noneExport policy: noneInformation about SA-Requests:Policy to accept SA-Request messages: noneSending SA-Requests status: disableMinimum TTL to forward SA with encapsulated data: 0SAs learned from this peer: 0, SA-cache maximum for the peer: noneInput queue size: 0, Output queue size: 0Counters for MSDP message:Count of RPF check failure: 0Incoming/outgoing SA messages: 0/0Incoming/outgoing SA requests: 0/0Incoming/outgoing SA responses: 0/0Incoming/outgoing data packets: 0/0Table 332 Description on the fields of the display msdp peer-status commandField DescriptionMSDP Peer MSDP peer addressAS Number of the AS where the MSDP peer is located. “?” indicates thatthe system was unable to obtain the AS number.State MSDP peer status:■ Up: Session set up; MSDP peer in session■ Listen: Session set up; local device as server, in listening state■ Connect: Session not set up; local device as client, in connectingstate■ Shutdown: Deactivated■ Down: Connection failedResets Number of times the MSDP peer connection is resetUp/Down time Length of time since MSDP peer connection was established/failed
