2478 CHAPTER 165: MAC ADDRESS TABLE MANAGEMENT CONFIGURATION COMMANDS display mac-address 00e0-fc01-0101MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)00e0-fc01-0101 1 Learned GigabitEthernet1/0 AGINGdisplay mac-address aging-timeSyntax display mac-address aging-timeView Any viewParameter NoneDescription Use the display mac-address aging-time command to display the aging timeof dynamic entries in the MAC address table.Related commands: mac-address (system view), mac-address (Ethernet interface view),mac-address timer, display mac-address.Example # Display the aging time of dynamic entries in the MAC address table. display mac-address aging-timeMac address aging time: 300sThe above information indicates that the aging time of dynamic entries in theMAC address table is 300 seconds.display mac-address mac-learningSyntax display mac-address mac-learning [ interface-type interface-number ]View Any viewParameter interface-type interface-number: Specifies an interface by its type and number.The MAC address learning status of the specified interface will be displayed.Table 637 Description on the fields of the display mac-address commandField DescriptionMAC ADDR MAC addressVLAN ID ID of the VLAN to which the MAC address belongsSTATE State of a MAC address, which could be Config static, Config dynamic,Learned and Blackhole.PORT INDEX Port name (Displayed as N/A for a blackhole MAC address)AGING TIME(s) Aging time, which could be:AGING, indicates that the entry is aging.NOAGED, indicates that the entry does not age.
