2694 CHAPTER 177: H.323 C ONFIGURATION COMMANDS[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2gk-idSyntax gk-id gk-name gk-addr gk-ipaddress [ ras-port ]undo gk-idView Gatekeeper client viewParameter gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.gk-ipaddress: IP address of gatekeeper.ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. Thedefault is 1719.Description Use the gk-id command to configure the primary gatekeeper for the gateway.Use the undo gk-id command to remove the primary gatekeeper.By default, no primary gatekeeper is specified for the gateway.Only after you configure the information of the primary gatekeeper can thegateway locate the gatekeeper for registration.Related command: area-id, gw-id, gk-2nd-id, gw-address, ras-on.Example # Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center,and RAS port to the default. system-view[Sysname] voice-setup[Sysname-voice] gk-client[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1gk-security call enableSyntax gk-security call enableundo gk-security call enableView Gatekeeper client viewParameter NoneDescription Use the gk-security call enable command to enable security calling on thevoice gateway.
