2228 CHAPTER 146: IP V4-BASED VRRP C ONFIGURATION COMMANDSreset vrrp statisticsSyntax reset vrrp statistics [ interface interface-type interface-number [ vridvirtual-router-id ] ]View User viewParameter interface interface-type interface-number: Clears VRRP statistics of a specifiedinterface. interface-type interface-number specifies an interface by its type andnumber.vrid virtual-router-id: Clears VRRP statistics of the specified standby group.virtual-router-id specifies a standby group by its group number, in the range 1 to255.Description Use the reset vrrp statistics command to clear VRRP statistics.If you specify both the interface and standby group, the statistics about thespecified standby group on the specified interface are cleared; if you specify onlythe interface, the statistics about all the standby groups on the interface arecleared; if you specify neither, the statistics about all the standby groups on thedevice are cleared.Example # Clear the statistics about all the standby groups on the device. reset vrrp statisticsvrrp vrid authentication-modeSyntax vrrp vrid virtual-router-id authentication-mode { md5 | simple } keyundo vrrp vrid virtual-router-id authentication-modeAuth Type Mismatch Number of packets with authentication failures due tomismatching authentication typesPacket Length Errors Number of packets with VRRP packet length errorsAddress List Errors Number of packets with virtual IP address list errorsBecome Master Number of times that the router worked as the masterPriority Zero Pkts Rcvd Number of received advertisements with the priority of 0Advertise Rcvd Number of received advertisementsAdvertise Sent Number of advertisements sentGlobal statistics Statistics about all standby groupsCheckSum Errors Total number of packets with checksum errorsVersion Errors Total number of packets with version errorsVRID Errors Total number of packets with VRID errorsTable 589 Description on the fields of the display vrrp statistics commandField Description
