2280 CHAPTER 149: NQA C LIENT CONFIGURATION COMMANDSExample # Configure the number of consecutive packets in a UDP-jitter probe as 100. system-view[Sysname] nqa entry admin test[Sysname-nqa-admin-test] type udp-jitter[Syaname-nqa-admin-test-udp-jitter] probe packet-number 100probe packet-timeoutSyntax probe packet-timeout packet-timeoutundo probe packet-timeoutView UDP-jitter test type viewParameter packet-timeout: Timeout time for waiting for responses in a UDP-jitter test, in therange 10 to 3600000 milliseconds.Description Use the probe packet-timeout command to configure the timeout time forwaiting for responses in a UDP-jitter test.Use the undo probe packet-timeout command to restore the default.By default, the timeout time in a UDP-jitter test is 3000 milliseconds.Example # Configure the timeout time for waiting for responses in a UDP-jitter test as 100milliseconds. system-view[Sysname] nqa entry admin test[Sysname-nqa-admin-test] type udp-jitter[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100probe timeoutSyntax probe timeout timeoutundo probe timeoutView DHCP/DLSw/FTP/HTTP/ICMP-echo/SNMP/TCP/UDP-echo test type viewParameter timeout: Timeout time in a probe except UDP-jitter probe, in milliseconds. For anFTP or HTTP probe, the value range is 10 to 86400000; for a DHCP, DLSw,ICMP-echo, SNMP, TCP or UDP-echo probe, the value range is 10 to 3600000.Description Use the probe timeout command to configure the timeout time in a probe.Use the undo probe timeout command to restore the default.By default, the timeout time is 3000 milliseconds.
