508 CHAPTER 31: PPP AND MP CONFIGURATION COMMANDS system-view[Sysname] interface mp-group 3[Sysname-Mp-group3]interface virtual-templateSyntax interface virtual-ethernet numberundo interface virtual-ethernet numberView System viewParameter number: VT number, ranging from 0 to 1023.Description Use the interface virtual-template command to create a VT or enter VT view.Use the undo interface virtual-template command to remove a VT.To remove a VT, make sure that all the relevant VA interfaces are removed and theVT is not being used.Example # Create VT 10 interface. system-view[Sysname] interface virtual-template 10[Sysname-Virtual-Template10]ip address ppp-negotiateSyntax ip address ppp-negotiateundo ip address ppp-negotiateView Interface viewParameter NoneDescription Use the ip address ppp-negotiate command to enable IP address negotiationon the local interface, so that the local interface can accept the IP addressallocated by the remote end.Use the undo ip address ppp-negotiate command to disable IP addressnegotiation.By default, IP address negotiation is disabled.Related command: remote address, ppp ipcp remote-address forced.Example # Configure the IP address of interface Serial 1/0 to be negotiable.
