1508 CHAPTER 94: M ULTICAST VPN C ONFIGURATION COMMANDS display multicast-domain vpn-instance mvpn switch-group sendMD switch-group information sent by VPN-Instance: mvpnTotal 2 switch-groups for 6 entriesTotal 2 switch-groups for 6 entries matched226.1.1.0 reference_count: 3(192.6.1.5, 239.1.1.1) switch time: 00:00:21(192.6.1.5, 239.1.1.158) switch time: 00:00:21(192.6.1.5, 239.1.2.50) switch time: 00:00:05226.1.1.1 reference_count: 3(192.6.1.2, 225.1.1.1) switch time: 00:00:21(192.6.1.2, 225.1.2.50) switch time: 00:00:05(192.6.1.5, 239.1.1.159) switch time: 00:00:21# View the switch-group reuse information sent by VPN instance mvpn during 30seconds in the MD. display multicast-domain vpn-instance mvpn switch-group send reuse 30MD switch-group information sent by VPN-Instance: mvpnTotal 2 switch-groups for 3 entriesTotal 2 switch-groups for 3 entries matched226.1.1.0 reuse_count: 1226.1.1.1 reuse_count: 1226.1.1.2 reuse_count: 1multicast-domain holddown-timeSyntax multicast-domain holddown-time intervalundo multicast-domain holddown-timeView VPN instance viewParameters interval: Backward MDT switching delay in seconds, namely the delay time formulticast traffic to be switched from the switch-MDT back to the share-MDT, inthe range of 0 to 180.Description Use the multicast-domain holddown-time command to configure thebackward MDT switching delay.Use the undo multicast-domain holddown-time command to restore thesystem default.Table 365 Description on the fields of the display multicast-domain vpn-instanceswitch-group send commandField Descriptionreference_count Number of VPN multicast groups referenced by the switch-groupsentswitch time Switching time of the VPN (S, G) entry referenced by theswitch-groupreuse_count Number of switch-group reuses during the specified length oftime
