1621mpls te cspfSyntax mpls te cspfundo mpls te cspfView MPLS viewParameter NoneDescription Use the mpls te cspf command to enable CSPF on current node.Use the undo mpls te cspf command to disable CSPF on current node.By default, CSPF is disabled on current node.Before enabling CSPF, enable MPLS TE in MPLS view.CSPF provides an approach to path selection in MPLS domains. You must enableCSPF before configuring other CSPF related functions.Example # Enable CSPF. system-view[Sysname] mpls[Sysname-mpls] mpls te cspfmpls te cspf timer failed-linkSyntax mpls te cspf timer failed-link timer-intervalundo mpls te cspf timer failed-linkView MPLS viewParameter timer-interval: Failed link timer setting, in the range 0 to 300 seconds. The defaultis 10 seconds.Description Use the mpls te cspf timer failed-link command to configure the failed linktimer.Use the undo mpls te cspf timer failed-link command to restore the default.Related command: mpls te cspf.Example # Set the failed link timer to 50 seconds. system-view[Sysname] mpls[Sysname-mpls] mpls te cspf timer failed-link 50
