1332 CHAPTER 87: M ULTICAST R OUTING AND F ORWARDING CONFIGURATION COMMANDS display multicast routing-tableMulticast routing table of VPN-Instance: public netTotal 1 entry00001. (172.168.0.2, 227.0.0.1)Uptime: 00:00:28Upstream Interface: Ethernet1/1List of 2 downstream interfaces1: Ethernet1/22: Ethernet1/0display multicast routing-table staticSyntax display multicast routing-table [ vpn-instance vpn-instance-name | all-instance ]static [ config ] [ source-address { mask-length | mask } ]View Any viewParameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31characters.all-instance: Specifies all VPN instances.config: Displays the configuration information of static routes.source-address: Multicast source address.mask: Mask of the multicast source address.mask-length: Mask length of the multicast source address, in the range of 0 to 32.Description Use the display multicast routing-table static command to view theinformation of multicast static routes.Example # View all the multicast static routes in the public instance. display multicast routing-table staticMulticast Routing Table of VPN-Instance: public netRoutes : 1Mroute 10.10.0.0/16Interafce = Ethernet1/0 RPF Neighbor = 10.10.0.254Matched routing protocol = , Route-policy = Table 324 Description on the fields of display multicast routing-tableField Description00001 Sequence number of the (S, G) entry(172.168.0.2, 227.0.0.1) An (S, G) entry of the multicast forwarding tableUptime Length of time for which the (S, G) entry has been up, inhours:minutes:secondsUpstream interface Upstream interface the (S, G) entry: multicast packets shouldarrive at this interfaceList of 2 downstreaminterfacesDownstream interface list: these interfaces need to forwardmulticast packets
