1249 system-view[Sysname] bgp 100[Sysname-bgp] ipv6-family[Sysname-bgp-af-ipv6] group test external[Sysname-bgp-af-ipv6] peer test ebgp-max-hoppeer enable (IPv6 address family view)Syntax peer { group-name | ipv4-address } enableundo peer { group-name | ipv4-address } enableView IPv6 address family viewParameters group-name: Name of an IPv4 peer group, a string of 1 to 47 characters. The IPv4peer group should be created beforehand.ipv4-address: IPv4 address of a peer.Description Use the peer enable command to enable an IPv4 peer or peer group.Use the undo peer enable command to disable an IPv4 peer or peer group.By default, no IPv4 peer or peer group is enabled.If an IPv4 peer or peer group is disabled, the router will not exchange routinginformation with it.Examples # Enable peer 1.1.1.1. system-view[Sysname] bgp 100[Sysname-bgp] ipv6-family[Sysname-bgp-af-ipv6] peer 1.1.1.1 enablepeer fake-as (IPv6 address family view)Syntax peer { ipv6-group-name | ipv6-address } fake-as as-numberundo peer { ipv6-group-name | ipv6-address } fake-asView IPv6 address family viewParameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.ipv6-address: IPv6 address of a peer.as-number: Local autonomous system number, in the range 1 to 65535.
