1676 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDSDescription Use the display bgp vpnv4 group command to display information about aspecified or all BGP VPNv4 peer groups.Example # Display information about BGP VPNv4 peer group a for VPN instance vpn1. display bgp vpnv4 vpn-instance vpn1 group aBGP peer-group is aremote AS number not specifiedType : externalMaximum allowed prefix number: 150000Threshold: 75%Configured hold timer value: 180Keepalive timer value: 60Minimum time between advertisement runs is 30 secondsPeer Preferred Value: 99No routing policy is configuredMembers:Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State10.1.1.1 4 200 18 21 0 1 00:12:58 Establisheddisplay bgp vpnv4 networkSyntax display bgp vpnv4 { all | vpn-instance vpn-instance-name } networkView Any viewTable 444 Description on the fields of the display bgp vpnv4 group commandField DescriptionBGP peer-group Name of the BGP peer groupremote AS number Number of the remote ASType Type of the BGP peer groupMaximum allowed prefix number Maximum number of routes that the VPN instancesupportsThreshold Threshold valueConfigured hold timer value Setting of the hold timerKeepalive timer value Keepalive intervalMinimum time betweenadvertisement runsMinimum route advertisement intervalPeer Preferred Value Weight for the routes from the peerNo routing policy is configured Whether the VPN instance is configured with a routingpolicyPeer IP address of the peerV Version of BGP that the peer runsAS AS number of the peer groupMsgRcvd Number of messages receivedMsgSent Number of messages sentOutQ Number of messages waiting to be sent to the peerPrefRcv Number of prefixes receivedUp/Down Duration of the BGP session in the current stateState Status of the peer
