112 CHAPTER 1: P UBLIC ATM AND DSL INTERFACE COMMANDSinterface atmSyntax interface atm interface-numberView System viewParameter interface-number: ATM or DSL interface number or DSL interface view.Description Use the interface atm command to enter ATM interface view.Example # Enter ATM 2/0 interface view. system-view[Sysname] interface atm 2/0[Sysname-Atm2/0]reset atm interfaceSyntax reset atm interface [ atm interface-number ]View User viewParameter atm interface-number: Specifies an ATM interface.Description Use the reset atm interface command to clear the statistics on the PVCscreated on an ATM interface or all the ATM interfaces.Note that:■ If you execute this command with an ATM interface specified, this commanddisplays the statistics on the PVCs created on the ATM interface.■ If you execute this command with no ATM interface specified, the statistics onthe PVCs created on all the ATM interfaces are cleared.To clear statistics about ATM interfaces, use the reset counters interfacecommand, which is described in Ethernet Interface Commands in the AccessVolume.Example # Clear the statistics on all the PVCs created on ATM 2/0 interface. reset atm interface atm 2/0
