1803display qos policy interfaceSyntax display qos policy interface [ interface-type interface-number ] [ inbound |outbound ] [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ]View Any viewParameters interface-type interface-number: Specifies an interface by its type and number.pvc: Used for ATM interface only, i.e., policy configuration of specified PVC onspecified ATM interface can be displayed.pvc-name: PVC name.vpi/vci: VPI/VCI value pair.Description Use the display qos policy interface command to view the configuration andoperating state about the policy on the specified interface, on the specified PVCon a particular ATM interface or on all interfaces and PVCs.Examples # Display the configuration and operating state about the policy on the interfaceEthernet 1/0 and PVC. display qos policy interface Ethernet 1/0Interface: Ethernet1/0Direction: OutboundPolicy: testClassifier: default-classMatched : 0/0 (Packets/Bytes)Rule(s) : if-match anyBehavior: beDefault Queue:Flow Based Weighted Fair QueuingMax number of hashed queues: 256Matched : 0/0 (Packets/Bytes)Enqueued : 0/0 (Packets/Bytes)Discarded: 0/0 (Packets/Bytes)Discard Method: TailClassifier: USER1Matched : 0/0 (Packets/Bytes)Operator: ANDRule(s) : if-match ip-precedence 5Behavior: USER1Marking:Remark IP Precedence 3Remarked: 0 (Packets)Behavior The behavior in a policy that corresponds with a class. Each behavior canhave multiple matching rules. For details, refer to “traffic behavior” on page1799.Table 480 Description on the fields of the display qos policy commandField Description
