2419*************************************************************************** All rights reserved (2004-2006) ** Without the owner’s prior written consent, ** No decompiling or reverse-switch fabricering shall be allowed. ***************************************************************************Welcome to legal(header legal)Press Y or ENTER to continue, N to exit.Welcome to motd(header motd)Welcome to login(header login)Login authenticationPassword:Welcome to shell(header shell)hotkeySyntax hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } commandundo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }View System viewParameter CTRL_G: Assigns the hot key to a command.CTRL_L: Assigns the hot key to a command.CTRL_O: Assigns the hot key to a command.CTRL_T: Assigns the hot key to a command.CTRL_U: Assigns the hot key to a command.command: The command line associated with the hot key.Description Use the hotkey command to assign a hot key to a command line.Use the undo hotkey command to restore the default.By default, the system specifies corresponding commands for , and , while the others are null.■ corresponds to display current-configuration■ corresponds to display ip routing-table■ corresponds to undo debugging allYou can customize this scheme as needed however.Example # Assign the hot key to the display tcp status command.
