1663Description Use the display mpls static-l2vc command to display information about staticVCs configured on the router.If you specify an interface, the command displays only information about staticVCs configured on the CE interface.Example # Display information about all static VCs configured on the router. display mpls static-l2vctotal connections: 1, 1 up, 0 downce-intf state destination tr-label rcv-label tnl-policySerial2/0 up 3.3.3.9 100 200 policy1# Display information about static VCs configured on interface Serial 2/0. display mpls static-l2vc interface Serial 2/0***CE-interface : Serial2/0 is upVC State : upDestination : 3.3.3.9Transmit-vpn-label : 100Receive-vpn-label : 400Tunnel Policy : policy1Tunnel Type : lspTunnel ID : 0x226013l2vpn-familySyntax l2vpn-familyTable 441 Description on the fields of the display mpls static-l2vc commandField Descriptiontotal connections Statistics about connection, including the total number of connections,number of connections that are up, and number of connections thatare downce-intfe CE interfaceState Status of the VCdestination Destination IP addresstr-label Outgoing labelrcv-label Incoming labeltnl-policy Name of the tunneling policyTable 442 Description on the fields of display mpls static-l2vc interfaceField DescriptionCE-interface Name of the CE interfaceVC State Status of the VCDestination Destination IP addressTransmit-vpn-label Outgoing labelReceive-vpn-label Incoming labelTunnel Policy Name of the tunneling policyTunnel Type Type of the tunnelTunnel ID ID of the tunnel
