130 PACKET FILTER FIREWALLCONFIGURATION C OMMANDSn The term “router” in this document refers to a router in a generic sense or a Layer3 switch running a routing protocol.display firewall ethernet-frame-filterSyntax display firewall ethernet-frame-filter { all | dlsw | interface interface-type interfacenumber }View Any viewParameter all: Displays all the firewall statistics information.dlsw: Displays the firewall statistics information of packets passing the DLSwmodule. interface-type interface-number: Specifies an interface by it type andnumber.Description Use the display firewall ethernet-frame-filter command to view theEthernet frame filtering statistics.Example # Display the Ethernet frame filtering statistics on Ethernet 1/0. display firewall ethernet-frame-filter interface ethernet 1/0Interface: Ethernet1/0In-bound Policy: acl 4000From 2005-06-07 14:46:59 to 2005-06-07 16:16:230 packets, 0 bytes, 0% permitted,0 packets, 0 bytes, 0% denied,0 packets, 0 bytes, 0% permitted default,0 packets, 0 bytes, 0% denied default,Totally 0 packets, 0 bytes, 0% permitted,Totally 0 packets, 0 bytes, 0% denied.Out-bound Policy: acl 4000From 2005-06-07 15:59:23 to 2005-06-07 16:16:230 packets, 0 bytes, 0% permitted,0 packets, 0 bytes, 0% denied,0 packets, 0 bytes, 0% permitted default,0 packets, 0 bytes, 0% denied default,Totally 0 packets, 0 bytes, 0% permitted,Totally 0 packets, 0 bytes, 0% denied.Table 515 Description on the fields of display firewall ethernet-frame-filterField DescriptionInterface Name of the ACL configured interfaceIn-bound Policy Indicates an inbound ACL rule has been configured on the interface
