OPERATIONSoftware LSM 5104-4 B 40-051 e 07/984.2.1 Boot WINDOWS NT+ Drive "A" must not contain a diskette.Normally, the LSM system is turned on with the REMOTE CONTROL switch. If this switch is notused, turn the system on with the "I" button on the laser module; in addition, the jumper plugsupplied must be plugged at the POWER REMOTE CONTROL terminal. Turn the REMOTE CONTROL main switch to the "ON" position. Computer boots up. Computer hardware system test runs.The monitor shows a dialog box for selecting the operating system version.Fig. 4-1
