4-8 Instruments and ControlsWipe ParkingIf the ignition is turned LOCK/OFFwhile the wipers are on 1, 2 or &,they will immediately stop.If the windshield wiper lever is thenmoved to OFF before the driverdoor is opened or within 10 minutes,the wipers will restart and move tothe base of the windshield.If the ignition is turned toLOCK/OFF while the wipersare performing wipes due towindshield wash, the wiperscontinue to run until they reachthe base of the windshield.Rainsense™For vehicles with Rainsense, asensor located near the top centerof the windshield detects theamount of water on the windshieldand automatically controls thefrequency of the windshield wiper.Keep this area of the windshieldclear of debris to allow for bestsystem performance.& (Rainsense Wipe SensitivityControl): Move the windshieldwiper lever to &. Turn the bandon the wiper lever to adjust thesensitivity.Turn the band up for moresensitivity to moisture.Turn the band down for lesssensitivity to moisture.To deactivate Rainsense, movethe windshield wiper lever outof & position.Wiper Arm Assembly ProtectionWhen using an automatic car wash,move the windshield wiper lever tothe OFF position. This disables theautomatic Rainsense windshieldwipes and/or rear wipers.With Rainsense, if the transmissionis in N (Neutral) and the vehiclespeed is very slow, the wipers willautomatically stop at the base of thewindshield.The wiper operations return tonormal when the transmission is nolonger in N (Neutral) or the vehiclespeed has increased.Windshield WasherPull the lever toward you to spraywasher fluid on the windshield.The spray continues until the leveris released. The wipers will run afew times. See Washer Fluid onpage 9‑23 for information on fillingthe windshield washer fluidreservoir.{ WARNINGIn freezing weather, do not useyour washer until the windshieldis warmed. Otherwise thewasher fluid can form ice on thewindshield, blocking your vision.