Seats and Restraints 2-5Adjust the power seat by movingthe control (A) forward or rearward.The front or rear of the seat can beadjusted up or down by moving thefront or rear of the control upand down.Adjust the seatback by moving thecontrol (B) forward or rearward.Adjust the lumbar support byusing the control (C). See LumbarAdjustment on page 2‑6 for moreinformation.Memory SeatsThe vehicle may have a memoryseat allowing saved and recalledseat settings. Controls are locatedon the outboard side of the seat.To save:1. Adjust the driver seat, includingthe seatback recliner, bothoutside mirrors, and pedals,if available.2. Press and hold the MEM buttonand button 1 at the same time.One beep indicates the positionis stored.Repeat for a second memory settingwhile pressing button 2.To recall the memory positions,press and hold either button 1 orbutton 2 corresponding to thedesired driving position. The seat,outside mirrors and pedals,if available, move to the storedposition . Releasing the buttonbefore the stored position isreached cancels the recall.Entering the vehicle using theRemote Keyless Entry (RKE)transmitter with the remote recallfeature activated in VehiclePersonalization automaticallyadjusts the seat, mirrors and pedals,if available. There is no adjustmentwhen the position has not beenchanged by another seatingposition.When the remote recall feature ison, the seat, mirror and pedalposition, if available, will be storedwhen the ignition is turned to OFF.It is stored according to the RKEtransmitter used to start the vehicle.To stop recall movement of the RKEremote recall feature, press one ofthe power seat controls, memorybuttons, or power mirror buttons.