Cadillac 2010 SRX Crossover Owner's Manual

Also see for 2010 SRX: Owner's manual Personalization guide Navigation system owner's manual

Contents

4-50 Instruments and ControlsTo program up to three devices:1. Hold the end of your hand-heldtransmitter about 3 to 8 cm(1 to 3 inches) away from theUniversal Home Remote buttonswhile keeping the indicatorlight in view. The hand-heldtransmitter was supplied by themanufacturer of your garagedoor opener receiver(motor-head unit).2. At the same time, press andhold both the hand-heldtransmitter button and one ofthe three Universal HomeRemote buttons to be used tooperate the garage door. Do notrelease the Universal HomeRemote button or the hand-heldtransmitter button until theindicator light changes from aslow to a rapidly flashing light.You now may release bothbuttons.Some entry gates and garagedoor openers may requiresubstitution of Step 2 with theprocedure noted in “GateOperator and CanadianProgramming” later in thissection.3. Press and hold for five secondsthe newly-trained UniversalHome Remote button (selectedbutton from Step 2) whileobserving the indicator lightand garage door activation.. If the indicator light stays oncontinuously or the garagedoor starts to move whenthe Universal HomeRemote button is pressedand released, then theprogramming is complete.There is no need tocontinue programmingSteps 4 through 6.. If the Universal HomeRemote indicator lightblinks rapidly fortwo seconds, then turnsto a constant light and thegarage door does notmove, continue with theprogramming Steps 4through 6.It may be helpful to haveanother person to assistwith the remaining Steps 4through 6.