Cadillac 2010 SRX Crossover Owner's Manual

Also see for 2010 SRX: Owner's manual Personalization guide Navigation system owner's manual

Contents

Seats and Restraints 2-55{ WARNINGChildren can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Buckle any unused safetybelts behind the child restraintso children cannot reach them.Pull the shoulder belt all the wayout of the retractor to set the lock,if your vehicle has one, after thechild restraint has been installed.Notice: Do not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.Make sure to attach the childrestraint at the proper anchorlocation.This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts.Instead use the vehicle's anchorsand child restraint attachmentsto secure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does nothave lower anchors, securethe child restraint with the toptether and the safety belts.Refer to your child restraintmanufacturer instructions andthe instructions in this manual.1.1. Find the lower anchors forthe desired seatingposition.1.2. Put the child restraint onthe seat.1.3. Attach and tighten the lowerattachments on the childrestraint to the loweranchors.2. If the child restraint manufacturerrecommends that the top tetherbe attached, attach and tightenthe top tether to the top tetheranchor, if equipped. Refer to thechild restraint instructions andthe following steps:2.1. Find the top tether anchorand open its cover toexpose the anchor.