Cadillac 2010 SRX Crossover Owner's Manual

Also see for 2010 SRX: Owner's manual Personalization guide Navigation system owner's manual

Contents

Vehicle Care 9-8311. Inflate the tire to therecommended inflationpressure using the pressuregauge (E). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 9‑59.The pressure gauge (E) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate reading. Thecompressor may be turnedon/off until the correct pressureis reached.12. Press the on/off button (D) toturn the tire sealant andcompressor kit off.Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.13. Unplug the power plug (C) fromthe accessory power outlet inthe vehicle.14. Disconnect the air onlyhose (F) from the tire valvestem, by turning itcounterclockwise, and replacethe tire valve stem cap.15. Replace the air only hose (F)and the power plug (C) back inits original location.16. Place the equipment in theoriginal storage location in thevehicle.Removal and Installation of theSealant CanisterTo remove the sealant canister:1. Unlock the air only hose (F) fromthe sealant canister (B) bypulling up on the lever.2. Pull the air only hose (F) fromthe sealant canister (B).3. Unwrap the sealant/air hose (G)from the compressor (A).