Cadillac 2010 SRX Crossover Owner's Manual

Also see for 2010 SRX: Owner's manual Personalization guide Navigation system owner's manual

Contents

9-80 Vehicle Care9. Inflate the tire to therecommended inflation pressureusing the pressure gauge (E).The recommended inflationpressure can be found on theTire and Loading Informationlabel. See Tire Pressure onpage 9‑59.The pressure gauge (E) mayread higher than the actual tirepressure while the compressor ison. Turn the compressor off toget an accurate pressurereading. The compressor maybe turned on/off until the correctpressure is reached.Notice: If the recommendedpressure cannot be reached afterapproximately 25 minutes, thevehicle should not be drivenfarther. The tire is too severelydamaged and the tire sealant andcompressor kit cannot inflate thetire. Remove the power plug fromthe accessory power outlet andunscrew the inflating hose fromthe tire valve. See RoadsideService on page 12‑8.10. Press the on/off button (D) toturn the tire sealant andcompressor kit off.The tire is not sealed and willcontinue to leak air until thevehicle is driven and thesealant is distributed in the tire,therefore, Steps 11 through17 must be done immediatelyafter Step 10.Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.11. Unplug the power plug (C) fromthe accessory power outlet inthe vehicle.12. Turn the sealant/air hose (G)counterclockwise to remove itfrom the tire valve stem.13. Replace the tire valvestem cap.14. Replace the sealant/airhose (G), and the powerplug (C) back in their originallocation.