SEATS AND RESTRAINTS 103When using the lap-shoulder belt tosecure the child restraint in thisposition, follow the instructions thatcame with the child restraint and thefollowing instructions:1. Move the seat as far back as itwill go before securing theforward-facing child restraint.Move the seat upward or theseatback to an upright position,if needed, to get a tightinstallation of the child restraint.When the passenger sensingsystem has turned off the frontoutboard passenger frontalairbag and knee airbag, the offindicator on the passenger airbagstatus indicator should light andstay lit when you start thevehicle. See Passenger AirbagStatus Indicator 0 123.2. Put the child restraint onthe seat.3. Pick up the latch plate, and runthe lap and shoulder portions ofthe vehicle's seat belt through oraround the restraint. The childrestraint instructions will showyou how.Tilt the latch plate to adjust thebelt if needed.4. Push the latch plate into thebuckle until it clicks.Position the release button onthe buckle, away from the childrestraint system, so that the seatbelt could be quickly unbuckledif necessary.5. Pull the shoulder belt all the wayout of the retractor to set thelock. When the retractor lock isset, the belt can be tightened butnot pulled out of the retractor.
