INSTRUMENTS AND CONTROLS 111windshield and controls the frequencyof the windshield wiper. To turn thisfeature on or off, see “Rain SenseWipers” under Vehicle Personalization0 140.Keep this area of the windshield clearof debris to allow for best systemperformance.INT : When enabled, move thewindshield wiper lever to INT. Turnthe x INT band on the wiper leverto adjust the sensitivity.. Turn the band up for moresensitivity to moisture.. Turn the band down for lesssensitivity to moisture.. Move the windshield wiper leverout of the INT position todeactivate Rainsense.Wiper Arm Assembly ProtectionWhen using an automatic car wash,move the windshield wiper lever toOFF. This disables the automaticRainsense windshield wipers.With Rainsense, if the transmission isin N (Neutral) and the vehicle speed isvery slow, the wipers willautomatically stop at the base of thewindshield.The wiper operations return to normalwhen the transmission is no longer inN (Neutral) or the vehicle speed hasincreased.n L : Pull the windshield wiper levertoward you to spray windshieldwasher fluid and activate the wipers.The wipers will continue until thelever is released or the maximumwash time is reached. When thewindshield wiper lever is released,additional wipes may occur dependingon how long the windshield washerhad been activated. See Washer Fluid0 269 for information on filling thewindshield washer fluid reservoir.{ WarningIn freezing weather, do not use thewasher until the windshield iswarmed. Otherwise the washer fluidcan form ice on the windshield,blocking your vision.Headlamp WasherIf equipped with headlamp washers,they are located to the side of theheadlamps.The headlamps must be on in order touse the headlamp washers. If theheadlamps are not on, only thewindshield will be washed.Pull the wiper lever toward you andhold briefly to activate. The headlampwashers will spray once, pause, andspray again. The headlamp washerswill spray again after five windshieldwash cycles.To refill the windshield washer fluid,see Washer Fluid 0 269.
