316 VEHICLE CARE5. Attach the air only hose (7) ontothe tire valve stem by turning itclockwise until it is tight.6. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets 0 112.If the vehicle has an accessorypower outlet, do not use thecigarette lighter.If the vehicle only has a cigarettelighter, use the cigarette lighter.Do not pinch the power plugcord in the door or window.7. Start the vehicle. The vehiclemust be running while using theair compressor.8. Press and turn the selectorswitch (1) clockwise to the AirOnly position.9. Press the on/off button (2) toturn the compressor on.The compressor will inflate thetire with air only.10. Inflate the tire to therecommended inflation pressureusing the pressure gauge (3). Therecommended inflation pressurecan be found on the Tire andLoading Information label. SeeTire Pressure 0 296.The pressure gauge (3) may readhigher than the actual tirepressure while the compressor ison. Turn the compressor off toget an accurate reading. Thecompressor may be turned on/offuntil the correct pressure isreached.If you inflate the tire higher thanthe recommended pressure youcan adjust the excess pressure bypressing the pressure deflationbutton (4) until the properpressure reading is reached. Thisoption is only functional whenusing the air only hose (7).11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.Be careful while handling the tiresealant and compressor kit as itcould be warm after usage.12. Unplug the power plug (8) fromthe accessory power outlet in thevehicle.13. Disconnect the air only hose (7)from the tire valve stem, byturning it counterclockwise, andreplace the tire valve stem cap.14. Replace the air only hose (7) andthe power plug (8) and cord backin its original location.15. Place the equipment in theoriginal storage location in thevehicle.
