4 PKE-SWD-32, interface for motor-starter combination with PKE12/324.9 Programming108 SmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.comByte 2:Motor current [%]Byte 3:Thermal motor image [%]Byte 4:Type of trip block, set time-lag classdata bit Designation Meaning Notes0 - 3 Ir Set value I r ￫ Section 4.9.1.4, „Set value I r“, page 1094 - 6 TRIPR =Trip reasonTrip reason ￫ Section 4.9.1.5, „Trip reason (TRIPR)“, page1107 ACKR =AcknowledgerequiredZMR manual function acknowl-edgement required0: No acknowledgement required1: Acknowledgement of overloadrequired￫ Section 4.9.2.1, „ZMR operating modemanual“, page 1147 6 5 4 3 2 1 0I-REL I-REL I-REL I-REL I-REL I-REL I-REL I-RELdata bit Designation Meaning Notes0 - 7 I-REL Motor current [%] ￫ Section 4.9.1.6, „Motor current[%] (I-REL)“, page 1117 6 5 4 3 2 1 0TH TH TH TH TH TH TH THdata bit Designation Meaning Notes0 - 7 TH Thermal motor image [%] ￫ Section 4.9.1.7, „Thermal motorimage [TH]“, page 1127 6 5 4 3 2 1 0– – CLASS CLASS CLASS TYPE TYPE TYPEdata bit Designation Meaning Notes0 - 2 TYPE Control option part no. ￫ Section 4.9.1.8, „Type of tripblock (TYPE)“, page 1123 - 5 CLASS Set time lag ￫ Section 4.9.1.9, „Time delaysetting (CLASS)“, page 1136 Not used - -7 Not used - -
