2 I/O modules EU5E-SWD…2.13 Analog module EU5E-SWD-2A2A52 SmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com2.13 Analog module EU5E-SWD-2A2A2.13.1 IntroductionThe EU5E-SWD-2A2A SmartWire-DT I/O module features two analog inputsand two analog outputs.Current sensors (0 - 20 mA) or voltage sensors (0 - 10 V) or actuators can beconnected to the inputs/outputs.12-bit resolution.Finally, the SmartWire-DT diagnostic LED is used to signal the network's/module's status.2.13.2 Surface mountingFigure 22: Layout of module EU5E-SWD-2A2A2.13.3 EngineeringThe signal range (voltage 0 – 10 V, current 0 – 20 mA) can be separately setfor each input and output in the programming system’s control configurator.They are electrically isolated from the SmartWire-DT network but not fromeach other. The resolution is 12-bit.abcda SmartWire-DT cable with external device plugb SmartWire-DT diagnostics LEDc Input IA0, IA1, output QA0, QA1d 0-V-24-V connection supply→ All 0 V connections (Ix -, Qx-; x = 0, 1) are connected with eachother and with the module’s 0 V supply.