Eaton SmartWire-DT Manual

Also see for SmartWire-DT: Application Manual Manual

Contents

2 I/O modules EU5E-SWD…2.12 Analog module EU5E-SWD-4AXSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 512.12.7.1 InputsByte 0:The input resolution is 12-bit. The analog values are transmitted as unsigned16-bit value.The exact addressing used for the data will depend on the selected program-ming system.Inputs2.12.7.2 DiagnosticsFor diagnostics (bit 4 in input byte 0 set), the module will report the followingerror cause:7 6 5 4 3 2 1 0SUBST PRSNT – DIAG – – – –Bit designation Meaning0 Not used –1 Not used –2 Not used –3 Not used –4 DIAG 0: no diagnostic alarm1: Diagnostic alarm5 Not used –6 PRSNT 0: Module not available1: Module available7 SUBST 0: Configured module present1: universal module M22-SWD-NOP(C) present15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0IW0 – – – – X X X X X X X X X X X XIW1 – – – – X X X X X X X X X X X XIW2 – – – – X X X X X X X X X X X XIW3 – – – – X X X X X X X X X X X XValue Meaning0x13 overload on at least one analog current input (I > 23 mA)