1 EU5C-SWD-PF1-1, EU5C-SWD-PF2-1 power modules1.1 IntroductionSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 131 EU5C-SWD-PF1-1, EU5C-SWD-PF2-1power modules1.1 IntroductionThe SmartWire-DT power modules EU5C-SWD-PF1-1 and EU5C-SWD-PF2-1are for the purpose of looping back the module power supply in the Smart-Wire-DT network.1.2 EU5C-SWD-PF1-11.2.1 Surface mountingConnections/power supplyFigure 1: Connections of the EU5C-SWD-PF1-1 modulea Contactors power supply AUXb SWD Inc SWD OutThe SmartWire-DT power module EU5C-SWD-PF1 loops the 24 V DC contac-tor voltage back into the SmartWire-DT cable.The looped back 24 V DC voltage is not electrically isolated from the 24 V DCsupply voltage (AUX) of the module. There is voltage reversal and EMC pro-tection.Voltage dips are not buffered.The subassembly does not need a diagnostics LED and no diagnostics infor-mation of its own is sent on the SmartWire-DT network. A fault in the 24 Vsupply voltage is therefore ascertainable only via the missing voltage of thedownstream contactors.abc