12 Interface for NZM compact circuit-breakers12.2 Surface mountingSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 22912.2.1 Indication and connection elementsThe network status of the module is signalled via the SmartWire-DT diagnos-tics LED.The other LEDs have the following function:12.2.2 ConnectionsThe module does not require an auxiliary power supply, it is supplied com-pletely via the SmartWire-DT connecting cable.Cc on Communication with the circuit-breaker via data cable activeoff No communication with the circuit-breaker2x- Without functionS For indicating the S0 energy pulseson A momentary off state indicates an energy pulse.off No power supply via SmartWire-DTflashing / ~ 1 Hz Power meters invalidI0 on Voltage at I0off No voltage at I0I01 on Voltage at I1off No voltage at I1Q0 on Output Q0 is onoff Output Q0 is offQ 1 on Output Q1 is onoff Output Q1 is off→ The voltage state of the inputs is indicated:→ The voltage state of the outputs is indicated:I0 Led 0 1 0 1I1 Led 0 0 1 1Circuit-breaker status - off Trip onQ0 Led 0 1 0 1Q1 Led 0 0 1 1Attribute ID - OFF ON -