14 Appendix14.6 Technical DataSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 28514.6.12 NZM circuit-breakers-...NZM-XSWD-704GeneralStandards IEC/EN 61131-2; EN 50178Dimensions W x H x D mm 35 x 90 x 101Weight kg 0.1mounting Top-hat rail IEC/EN 60715, 35 mmMounting position verticalAmbient mechanical conditionsDegree of protection (IEC/EN 60529,EN50178, VBG 4) IP20Vibrations(IEC/EN 61131-2:2008)constant amplitude 3.5 mm Hz 5 - 8.4Constant acceleration, 1 g Hz 8.4 - 150Mechanical shock resistance (IEC/EN 60068-2-27)semi-sinusoidal 15 g/11 msImpactresis-tances9Drop to IEC/EN 60068-2-31 Dropheightmm 50Free fall, packaged(IEC/EN 60068-2-32)m 0.3Electromagnetic compatibility (EMC)Over voltage category IIPollution degree 2Electrostatic discharge(IEC/EN 61131-2:2008)Air discharge (Level 3) kV 8Contact discharge (Level 2) kV 4Electromagnetic fields (IEC/EN 61131-2:2008)80-1000 MHz V/m 101.4 - 2 GHz V/m 32 - 2.7 GHz V/m 1Radio interference suppression (SmartWire-DT)EN 55011 Class ABurst (IEC/EN 61131-2:2008, Level 3)Supply cables kV 2Signal cables kV 1SmartWire-DT cables kV 1Surge (IEC/EN 61131-2:2008, Level 1) –Radiated RFI(IEC/EN 61131-2:2008, Level 3)V 10Ambient climatic conditionsOperating ambient temperature(IEC 60068-2)?C –25 - +55Condensation prevent with suitable measuresStorage °C –40 - +70Relative humidity, non-condensing (IEC/EN60068-2-30)% 5 - 95SmartWire-DT interfaceModule type SWD module (slave)Baud rate setting AutomaticStatus SmartWire-DT LED green