6 PKE-SWD-CP Connection for circuit-breaker PKE6.1 IntroductionSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 1376 PKE-SWD-CPConnection for circuit-breaker PKE6.1 IntroductionThe purpose of the PKE-SWD-CP SmartWire-DT module is to control PKEmotor-protective circuit-breakers, used in combination with PKE-XTU(W)ACP-... trip blocks, as communications-capable circuit-breakers via aprogrammable logic controller and to acquire data from PKE electronic motor-protective circuit-breakers.The PKE-SWD-CP is connected directly to motor-protective circuit-breakersPKE32 or PKE65.The interoperability requirements for these SWD modules are described in→ Section 14.5, „SWD module interoperability requirements“, page 258.NOTICEPKE-SWD-CP modules can only be combined with the followingPKE trip blocks:• PKE-XTUACP-36• PKE-XTUWA-CP-36• PKE-XTUACP-65→ In addition to the basic devices (contactors, motor-starter com-binations, etc.) described in the individual sections, the functionelements of the SmartWire-DT system listed in this manual canalso be combined with equivalent Eaton basic devices that usethe Eaton catalog number as part number. For a reference table,see the Appendix Page 257.