14 Appendix14.2 Power-/current consumption of the SWD modules on UAUX254 SmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com14.2 Power-/current consumption of the SWD modules on U AUXSL4-SWD 171311 26 –SL7-SWD 171459 26 –SWD4-RC8-10 116020 17 –Partno.Article no. Current consumption[mA]NotesDIL-SWD-32-…Pull-in powerfor DILMA,DILM7 W 3at DILM7 – DILM15 W 4.5at DILM17 – DILM38 W 12Pick-up currentat DILM7 – DILM9 mA 125at DILM12 – DILM15 mA 188at DILM17 – DILM38 mA 500Sealing powerfor DILMA, DILM7 W 3at DILM7 – DILM15 W 4.5at DILM17 – DILM38 W 0.5Holding currentfor DILMA, DILM7 mA 125at DILM7 – DILM15 mA 188at DILM17 – DILM38 mA 21EMS-...-SWD-ADPCurrentSwitch on mA 120Operation mA 60NZM-XSWD-704CurrentWith active remote operator mA 300With inactive remote operator mA 100SL4-SWD SL7-SWDCurrentWith an LED light moduleContinuous light mA 33 54Flashing light mA 36 58Strobe light mA 65 135With an LM high-power LEDContinuous light mA – 200Flashing light mA – 265Strobe light mA – 265With a filament lamp light module mA 167 292With an acoustic moduleContinuous or pulsed tone mA 39 92Continuous or pulsed tone, 8 types of mA – 115
