6 PKE-SWD-CP Connection for circuit-breaker PKE6.10 ProgrammingSmartWire-DT modules IP20 09/17 MN05006001Z EN www.eaton.com 1516.10.3 Acyclic data PKE-SWD-CPThe following acyclical objects can be read via the PKE-SWD-CP in additionto the cyclical input and output bytes.The required object is addressed with parameters “ID” and “Index”. Theinput address of the SWD module with which communication is to be estab-lished is set with parameter “ID”. Parameter “Index” addresses the object.The first object is assigned number 1, the second number 2 etc. For the PKE-SWD-CP, object 1 supplies current value “I-REL-MAX”.Object 1 [Index 1]:Byte 0:Object 2 [Index 2]:Byte 0:Object 3 [Index 3]:Byte 0:7 6 5 4 3 2 1 0I-REL-MAX I-REL-MAX I-REL-MAX I-REL-MAX I-REL-MAX I-REL-MAX I-REL-MAX I-REL-MAXData byte data bit designation Description Notes0 0 - 7 I-REL-MAX Relative currentvalue of the highestphase current [%]￫ Section6.10.1.6, „Relative currentvalue (I-REL)“, page 1477 6 5 4 3 2 1 0TH TH TH TH TH TH TH THData byte data bit designation Description Notes0 0 - 7 TH Thermal motorimage [%]￫ Section6.10.1.7, „Thermal model(TH)“, page 1487 6 5 4 3 2 1 0– – I > I > I > TYPE TYPE TYPEData byte data bit designation Description Notes0 0 - 2 TYPE Control option partno.￫ Section 6.10.1.8, „Typeof trip block (TYPE)“, page1483 - 5 I > Factor for short-circuit current￫ Section6.10.1.9, „Short-circuitrelease (I >) factor“, page1496-7 Not used – –
