Installer Menu Options i-on RangePage 98The Installer code allows you to enter the Installer Menu, and carry out an Installer reset.However, the Installer code does not allow you to set or unset the system.40 50 160 When logging into the i-onEX Web browser interface you must key intothe password field the same code as you have programmed into the Installer Code field.Keypad TextIf required the installer can key in a text message that appears on the first line of thedisplay in the standby screen. This could be, for example, the name of the installer’scompany. See page 18 for hints on editing text.Remote Needs EntryInstead of using an entry timer triggered by a Final Exit zone to allow the user to gainaccess to the control unit and unset the system (or a partition), the user can employ aremote control. To choose between either of these options select: System Options –Remote needs Entry. The options available are:Enabled The user must first trigger a Final Exit zone and start the entry timer beforeunsetting a Full Set system or partition with a remote control. The systemunsets those partitions the user is assigned to that have an active entrytimer. If a partition that the user is assigned to does not have an activeentry timer then the partition remains set.Disabled The user can unset the system or partition using a remote control withoutfirst starting the entry timer. The system unsets all partitions that the user isassigned to.Remote Entry Part SetIn a Part Set system or partition, instead of using an entry timer triggered by a Final Exitzone to allow the user to gain access to the control unit and unset the system, the usercan employ a remote control. To choose between either of these options select: SystemOptions – Remote needs Entry PrtSt. The options available are:Enabled The user must first trigger a Final Exit zone and start the entry timer beforeunsetting a Part Set system or partition with a remote control. The systemunsets those partitions the user is assigned to that have an active entrytimer. If a partition that the user is assigned to does not have an activeentry timer then the partition remains part set.Disabled The user can unset a Part Set system or partition using a remote controlwithout first starting the entry timer.RKP Needs EntryInstead of using an entry timer triggered by a Final Exit zone to allow the user to gainaccess to the control unit and unset the system (or a partition), the user can employ aradio keypad. To choose between either of these options select: System Options – RKPneeds Entry. The options available are:Enabled The user must first trigger a Final Exit zone and start the entry timer beforeunsetting the system (or partition) with a radio keypad. The system unsetsthose partitions the user is assigned to that have an active entry timer. If apartition that the user is assigned to does not have an active entry timerthen the partition remains set.Disabled The user can unset the system using a radio keypad without first startingthe entry timer. The system unsets all partitions that the user is assignedto.